technical data sheet power top view leds with lens 67-31j/rsc-az0z2b9z5/ct everlight electronics co., ltd. http://www.ever light.com rev. 1 page: 1 of 10 device no. : dse-0001812 prepared date: 23-jul-2007 prepared by: josh chou features ? p-lcc-3 package. ? high flux output. ? high current capability. ? white package. ? optical indicator. ? colorless clear window. ? ideal for backlight and li ght pipe application. ? inter reflector. ? wide viewing angle. ? suitable for automatic placement equipment. ? suitable for reflow and wa ve solder processes. ? available on tape and reel (12mm tape). ? pb-free. ? the product itself will remain within rohs compliant version. descriptions ? the 67-31j series is available in soft orange , red and yellow. due to the package design, the led has wide viewing angle and optimized light coupling by inter reflector. this feature makes the ideal for light pipe application. the low curre nt requirement makes this device ideal for portable equipment or any other application where power is at a premium. applications ? indicator and backlight for audio and video equipment. ? indicator and backlight in office and family equipment. ? flat backlight for lcd?s, switches and symbols. ? light pipe application. ? general use. device selection guide chip material emitted color resin color algainp brilliant red water clear
technical data sheet power top view leds with lens 67-31j/rsc-az0z2b9z5/ct everlight electronics co., ltd. http://www.ever light.com rev. 1 page: 2 of 10 device no. : dse-0001812 prepared date: 23-jul-2007 prepared by: josh chou package dimensions note: tolerance unless mentioned is 0.1mm; unit = mm
technical data sheet power top view leds with lens 67-31j/rsc-az0z2b9z5/ct everlight electronics co., ltd. http://www.ever light.com rev. 1 page: 3 of 10 device no. : dse-0001812 prepared date: 23-jul-2007 prepared by: josh chou absolute maximum ratings (t a =25 ) parameter symbol rating unit reverse voltage v r 5 v forward current i f 50 ma peak forward current i fp 100 ma power dissipation pd 120 mw electrostatic discharge(hbm) esd 2000 v operating temperature t opr -40 ~ +85 storage temperature t stg -40 ~ +90 soldering temperature tsol reflow soldering : 260 for 10 sec. hand soldering : 350 for 3 sec. electronic optical characteristics parameter symbol min. typ. max. unit condition luminous intensity i v 4500 ----- 18000 mcd i f =50ma viewing angle 2 1/2 ----- 30 ----- deg i f =50ma peak wavelength p ----- 632 ----- nm i f =50ma dominant wavelength d 623.5 ----- 633.5 nm i f =50ma spectrum radiation bandwidth ----- 20 ----- nm i f =50ma forward voltage v f 2.15 ----- 2.75 v i f =50ma reverse current i r ----- ----- 10 a v r =5v notes: 1. tolerance of luminous intensity 11% 2. tolerance of dominant wavelength 1nm 3. tolerance of forward voltage 0.1v
technical data sheet power top view leds with lens 67-31j/rsc-az0z2b9z5/ct everlight electronics co., ltd. http://www.ever light.com rev. 1 page: 4 of 10 device no. : dse-0001812 prepared date: 23-jul-2007 prepared by: josh chou bin range of luminous intensity bin min max unit condition z0 4500 7200 z1 7200 11500 z2 11500 18000 mcd i f =50ma bin range of dominant wavelengths bin code min. max. unit condition e4 623.5 626.5 e5 626.5 629.5 e6 629.5 632.5 e7 632.5 635.5 nm i f =50ma bin range of forward voltage bin min max unit condition 2 2.15 2.35 3 2.35 2.55 4 2.55 2.75 v i f =50ma notes: 1. tolerance of luminous intensity: 11% 2. tolerance of dominant wavelength: 1nm 3. tolerance of forward voltage: 0.1v
technical data sheet power top view leds with lens 67-31j/rsc-az0z2b9z5/ct everlight electronics co., ltd. http://www.ever light.com rev. 1 page: 5 of 10 device no. : dse-0001812 prepared date: 23-jul-2007 prepared by: josh chou typical electro-optical characteristic curves 500 25 0 50 75 100 550 600 650 700 ta=25c forward voltage v (v) relative luminous intensity (%) -60 forward current derating curve ambient temperature ta (c) 0 forward current 10 f i (ma) 1 10 40 20 60 100 85 -20 -40 0 20 60 40 100 80 relative luminous intensity (%) 100 1000 forward current wavelength (nm) ambient temperature i (ma) f spectrum distribution forward voltage f ta=25c forward current vs. 10 relative luminous intensity (%) 1 10 100 1000 forward current i (ma) 0 10 1 10 2 f ta=25c relative luminous intensity vs. d u t y = 1 / 1 0 f = 1 k h z forward current 30 20 ta=25c 10 0 radiation diagram 40 60 50 90 80 0.6 70 0.2 0.1 0.5 0.3 0.4 1.0 0.8 0.9 0.7 20 30 40 50 60 70 80 ambient temperature ta (c) 1.0 20 30 40 60 50 70 2.6 1.8 1.4 2.2 3.0 relative luminous intensity vs.
technical data sheet power top view leds with lens 67-31j/rsc-az0z2b9z5/ct everlight electronics co., ltd. http://www.ever light.com rev. 1 page: 6 of 10 device no. : dse-0001812 prepared date: 23-jul-2007 prepared by: josh chou label explanation cat: luminous intensity rank hue: dom. wavelength rank ref: forward voltage rank reel dimensions note: tolerance unless mentioned is 0.1mm, unit = mm
technical data sheet power top view leds with lens 67-31j/rsc-az0z2b9z5/ct everlight electronics co., ltd. http://www.ever light.com rev. 1 page: 7 of 10 device no. : dse-0001812 prepared date: 23-jul-2007 prepared by: josh chou carrier tape dimensions: loaded quantity 1500 pcs per reel note tolerance unless mentioned is 0.1mm; unit = mm moisture resistant packing label desiccant label aluminum moisture-proof bag +
technical data sheet power top view leds with lens 67-31j/rsc-az0z2b9z5/ct everlight electronics co., ltd. http://www.ever light.com rev. 1 page: 8 of 10 device no. : dse-0001812 prepared date: 23-jul-2007 prepared by: josh chou reliability test items and conditions the reliability of products shall be satisfied with items listed below. confidence level 90% ltpd 10% no. items test condition test hours/cycles sample size ac/re 1 reflow soldering temp. : 260 5 min. 5 sec. 6 min. 22 pcs 0/1 2 temperature cycle h : +100 15min 5 min l : -40 15min 300 cycles 22 pcs. 0/1 3 thermal shock h : +100 5min 10 sec l : -10 5min 300 cycles 22 pcs. 0/1 4 high temperature storage temp. : 100 1000 hrs. 22 pcs. 0/1 5 low temperature storage temp. : -40 1000 hrs. 22 pcs. 0/1 6 dc operating life i f = 50 ma / 25 1000 hrs. 22 pcs. 0/1 7 high temperature / high humidity 85 /85%rh 1000 hrs. 22 pcs. 0/1
technical data sheet power top view leds with lens 67-31j/rsc-az0z2b9z5/ct everlight electronics co., ltd. http://www.ever light.com rev. 1 page: 9 of 10 device no. : dse-0001812 prepared date: 23-jul-2007 prepared by: josh chou precautions for use 1. over-current-proof customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package: the led should be kept at 30 or less and 90%rh or less. 2.3 after opening the package: the led floor life are 72 hours under 30 or less and 60% rh or less. if unused led remains, it s hould be stored in moisture proof packages. 2.4 if the moisture absorbent material (silica gel) has faded away or the led have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 605 for 24 hours. 3. soldering condition 3.1 pb-free solder temperature profile 120 sec. max. 1~5 c / sec. pre-heating 180~200c 60 sec. max. above 220c 260c. max. 10 sec. max. 1~5 c / sec. 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put st ress on the leds during heating. 3.4 after soldering, do not warp the circuit board.
technical data sheet power top view leds with lens 67-31j/rsc-az0z2b9z5/ct everlight electronics co., ltd. http://www.everli ght.com rev. 1 page: 10 of 10 device no. : dse-0001812 prepared date: 23-jul-2007 prepared by: josh chou 4. soldering iron each terminal is to go to the tip of soldering iron temper ature less than 350 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5. repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double-head soldering iron should be used. it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing. everlight electronics co., ltd. tel: 886-2-2267-2000, 2267-9936 office: no 25, lane 76, sec 3, chung yang rd, fax: 886-2267-6244, 2267-6189, 2267-6306 tucheng, taipei 236, taiw an, r.o.c http://www.everlight.com
|
